Nail Glue Application & Removal Guide
A little guidance for your next set. Choose the part of your routine you need.
Shortened demonstrations accompany the steps. Follow the written directions for timing and precautions.

Bonds skin and eyes in seconds.
Keep out of reach of children.Read your bottle and box warnings.
Product referencePrep
Start with clean, dry nails and a comfortable press-on fit. Read your package directions before you begin.
Give Grip-Lock™ a clean, dry surface to bond to.
- Find your fit first.Try each press-on before opening the glue. Choose a comfortable side-to-side fit that doesn’t press into your skin.Line them up in order so your set is ready to go.
- Start clean. Dry completely.Wash your hands, remove visible dirt and dry around every nail edge. Don’t apply over damaged, sore or irritated nails or skin.Save hand cream and cuticle oil for later.
- Buff lightly—not deeply.If your press-on instructions call for it, use a fine-grit buffer to gently remove surface shine. Stop before thinning the nail.Skip buffing on weak, peeling or damaged nails. More filing is not better prep.
- Wipe away dust and oil.Remove loose dust, then use an isopropyl-alcohol nail-prep wipe if permitted by your press-on instructions. Wipe the nail surface gently; avoid irritated or broken skin.Keep the glue capped and separate from wipes. Never use cotton or wool to wipe glue spills—contact can generate intense heat.
- Let it dry. Then leave it alone.Let the alcohol evaporate fully before opening the glue. Don’t touch the prepared nail surface or add oils, lotion or water.No fixed waiting time: the surface needs to be completely dry.
Ready? Clean nails. Dry surfaces. Your set laid out.
Apply
Clean, dry nails. Press-ons already sized. Work through one nail at a time.
- GripBrush on a thin, even layer.Use the GIRLIES brush to apply a thin layer of glue to your natural nail.Keep the brush on the nail and away from cuticles and skin. Aim for an even layer, not a pool of glue.
- Line it up. Place it carefully.Match the press-on to the nail you sized during Prep. Align it with your natural nail, keeping it clear of the surrounding skin, then place it into position.Have the matching press-on ready before brushing on glue.
- LockPress and hold for 10–15 seconds.Press the nail firmly into place and keep steady pressure for 10–15 seconds.Hold it still instead of repeatedly lifting it to check the bond.
- Close the cap. Let your set settle.Close the bottle tightly after each use to help prevent drying. Let the glue fully set before heavy water exposure.Follow your package and press-on directions for any additional aftercare.
Loving it so far? Tell us what you think.
Leave a reviewRunning low?
RestockRemove
Take your time. Soften the adhesive with a compatible remover—never pull or pry.
Shortened demonstrations: warm soapy water, a separate compatible acetone-remover soak, after release and aftercare. Use acetone only if your set and remover directions permit soaking. The liquids are not mixed. The video does not show the full removal time or the moment a nail releases.
- Warm water + soap, if your set permits.Use comfortably warm, not hot, water. This optional step is not a substitute for nail-glue remover.Water alone is not a reliable way to remove a strong glue bond.
- Use a compatible remover.An acetone-based nail-glue remover may be suitable if compatible with your glue and press-on set. Follow its label and your set’s directions for application and time.Acetone can damage some press-ons. Use separately from the soapy-water step; don’t mix products. Never heat remover. Use in a well-ventilated area, away from flames and ignition sources.
- Let it release. Don’t force it.Remove only when the nail releases without resistance. If it resists, stop and follow the remover’s directions for further softening. Never pull, pry or wedge a tool underneath.Stop if removal hurts or your skin becomes irritated.
- Finish with care.Follow the remover label for cleanup, then wash, dry and moisturize. Don’t scrape or peel remaining adhesive.Follow the compatible remover’s directions for any remaining residue.
Loved the hold? Tell us how long your set lasted.
Leave a reviewReady for the next one?
RestockSafety
A strong bond needs careful handling. Read the warnings on your bottle and box before every use.
Before you begin
- Keep it on the nail.Avoid skin, eyes and mouth. Never use nail glue for lashes or to close a wound. Don’t apply over sore, broken, infected or irritated nails or skin.
- Keep cotton and wool away from wet glue.Contact can release intense heat and cause burns. Don’t use cotton pads, swabs, wool or clothing to wipe up liquid glue.
- Use fresh air. Stop if irritated.Work in a well-ventilated space and avoid breathing vapor. Stop use if you develop burning, redness, swelling or irritation, and seek medical advice.
- Store closed and out of reach.Close the cap tightly after use. Keep away from children and pets. Keep away from heat, open flames and direct sunlight. Follow your package’s storage directions; don’t transfer glue to another container.
If an accident happens
Glue in or around the eyes
Rinse immediately with room-temperature water for at least 15 minutes. Do not force glued eyelids open. Never put acetone or remover in or near the eyes.
Call Poison Control promptly for guidance. Severe eye pain or vision changes need urgent medical care.
Skin stuck together—or a spill on skin
Don’t pull bonded skin apart or peel the glue off. Gently soak a small bonded area in warm, soapy water without forcing it apart. Contact Poison Control if it won’t separate or you’re unsure what to do.
If the glue feels hot or causes a burn, cool the area under running water and get medical advice. Don’t pull off fabric stuck to skin. Don’t use cotton or wool on wet glue.
Glue in the mouth or swallowed
Don’t force bonded lips or teeth apart and don’t induce vomiting. Call Poison Control immediately for specific advice. Never use acetone or nail-glue remover in the mouth.
For choking or trouble breathing, call emergency services immediately.
Vapor irritation
Stop using the product and move to fresh air. Contact Poison Control if symptoms persist or you need advice. Trouble breathing requires emergency help.
Remover has its own warnings. Use only a remover compatible with your glue and press-ons, follow its label, and never heat it or use it near flames. Never pull or pry off a bonded press-on.
General cyanoacrylate guidance: Poison Control: super glue · First-aid guidance. This guide supplements—not replaces—your product’s directions and warnings.
